Have you ever wondered how meat was preserved before the invention of modern canning techniques? Preserving meats is an important survival skill and making pemmican is one of the easier and more effective ways to preserve meat.
Pemmican is one of the original survival foods that consists of meat and fat. At its most basic, pemmican is really just a technique for preserving meat for long periods of time without the need to refrigerate it and often contains dried fruit and nuts along with other spices.
What makes pemmican so interesting is the fact that it can last for around 10 years (some claim up to 50 but I believe that is a stretch) and only needs to be kept cool in order to not spoil.
- What is Pemmican and How is it Made?
- How Do You Make Pemmican?
Thanks for supporting Ready Lifestyle! We participate in the Amazon associates program and other affiliate programs. We earn a small commission on qualifying orders at no expense to you.
Depending on where the pemmican was produced, the recipes varied widely. Some tribes had access to a wide variety of fruit and nuts while others were limited to very few suitable additives to enhance the taste of the pemmican.
The word comes from the Cree word pimîhkân, which is derived from the word pimî, “fat, grease”.
Pemmican originated with Native Americans as a way to preserve meat. It was normally made with whatever meat was available (such as bison, elk, deer, and moose).
When Europeans arrived in America they learned the recipe from Native American tribes and adopted it. The ability to make pemmican was actually one of the ways that the original fur trade was able to thrive and was a staple of early explorers.
Pemmican was so important in the past that the export of pemmican was forbidden from certain territories and sparked the so-called “pemican war” in the early 1800s.
While pemmican isn’t exactly making a comeback, it is gaining in popularity among those that take part in prepping and survival circles.
This interest is because pemmican can be made with relative ease, doesn’t need power or other modern means to make and is lightweight compared to the calories that it contains.
Pemmican making is also a great survival skill to have. Using this technique will allow you to preserve and store large quantities of meat that you would otherwise never be able to consume before it spoiled.
Jerky is strips of lean meats dried and salted to remove all of the moisture. This helps inhibit the growth of microorganisms and preserves the meat.
Pemmican is made from just about any kind of meat that is available. The meat is then ground up and mixed with rendered fat. Berries and nuts were sometimes added to pemmican depending on what was available.
Pemmican is made by taking the following steps:
1. Dry your chosen meat. Any meat from wild game (bison, elk, deer, and moose) or beef can be used to make pemmican.
Start by removing as much excess fat from the meat as possible. Then, cut the meat into strips as thin as possible. (You can place the meat in a freezer until it becomes firm to assist in cutting it into thin strips.)
These thin strips are then placed on a drying rack in the sun until they snap when bent. An alternate technique is to place the strips in the oven on its lowest setting allow the meat to dry.
You may also salt the meat strips to aid in flavor and help preserve the end product. Lean cuts of meat are the best but fattier cuts can be used as long as the meat is properly dried.
The traditional technique for drying meats was a combination of smoking and drying. You can accomplish this by building a tripod over an open fire and hanging the thin strips of meat at a distance above the fire that allows it to dry and smoke rather than cook.
2. Grind the dried meat. This step involves grinding the dried meat into a powdered (meal) consistency. This can be accomplished with a hand grinder, or mortar and pestle.
An alternative method for grinding meat is to use either a food processor or blender. This modern technique for making pemmican is much faster than traditional methods.
The traditional means of grinding meat for pemmican was accomplished using rocks. In a survival situation, you can easily use smooth rocks to grind the meat down as much as possible.
3. Render the fat from your meat. Rendering the fat is one of the most important parts of the recipe. Heat the fat slowly over a fire or in an oven. Stir the fat occasionally and leave it on the heat until it no longer bubbles. This means that the fat has properly been rendered.
Alternatively, you can put the fat into a crockpot.
When the fat is properly rendered, strain it through a fine-mesh strainer to remove any solids left behind.
Keep in mind that when oil or fat is smoking, it is burning. If this begins to happen, you need to lower the heat or move the pot farther from the fire.
Another source of rendered fat is what is the white fat that is leftover after cooking a stew or boiling meat. This fat is perfect for pemmican and uses what would otherwise be wasted.
4. Mix ground meat and any dried ingredients. Add any dried fruits, nuts, or spices into the dried meat. Keep in mind that the more oils and moisture you introduce to the mixture can shorten the shelf life of the final pemmican.
Dry any additives in a manner similar to how you dried the meat. Cut berries into slices and dry them. The dried berries or fruit can be broken into chunks or ground into a powder-like the meat.
Historically, cranberries and Saskatoon berries were used. Modern ingredients can also be tested to add flavor to the pemmican mixture.
Any kind of nuts or fruit can be used in your pemmican mixture. We have access to many ingredients that the Native Americans could only dream of. Experiment to find what works best for you.
Other suggested ingredients are brown sugar, cranberries, sunflower seeds, cayenne pepper, or any other seasoning that you like.
Maintain roughly a 1:1 mixture of meat to dried additives.
5. Add rendered fat. Next, add 1 part rendered fat to 2 parts of the dry mixture. Add the rendered fat slowly to try to prevent adding too much. Combine everything until the mixture is evenly mixed.
An alternate way of making pemmican is by taking prerendered fat that has cooled and mixing the ingredients together. If you are using solid fat like this, mixing is more important. You must combine the ingredients until all of the chunks of fat are broken up and evenly distributed.
6. Mix in wet ingredients. Additional ingredients like honey, maple syrup, and peanut butter can be added to enhance the flavor of the pemmican. If the mixture is too wet, flour or almond meal can be added until the mixture is firm again.
7. Form pemmican into bars or balls. Making pemmican into small balls is easier in a lot of survival situations but you can also spread the pemmican mixture into a thin layer. When the mixture has dried, you can cut the pemmican into bars.
8. Store the completed product. Pemmican lasts the longest when it is stored in an airtight container in a cool, dark place. Airtight containers could be hard to come by in a survival situation.
Traditionally, Native Americans stored pemmican in rawhide bags so keeping your pemmican covered and in a relatively cool place should suffice.
A traditional root cellar is ideal.
Another traditional preparation of pemmican is as a sausage, packed into the intestine of the animal. These sausage links were normally divided into single-serving size making them easy to divide and pack away.
A vegetarian equivalent of pemmican can be made with peanut butter, fruit nuts and vegetable leather instead of using meat products. This vegetarian pemmican doesn’t have the same amount of calories though so be sure to prepare accordingly!
Pemmican is one of the best ways to preserve meat in the field or at home. It can last for up to 10 years and some people even claim that a shelf life of 50 years is possible!
Eating pemmican by itself should really only be done if you don’t have anything else to mix it with. Cooking pemmican in a stew with available vegetables is a much better way to eat it and it makes it taste much better.
Pemmican was normally served as a stew with water, flour and pemmican and onions and potatoes added if they were available. It was also fried in a frying pan with onions and potatoes.
In a pinch, you can eat pemmican by itself but it tastes a lot like you’d think it would if you eat it that way.
Prepare your pemmican in a similar manner to any other preserved meat and you won’t be disappointed with the flavor.
Pemmican is packed full of energy between the fats, meat and optional berries and nuts. Because of this, a 4 oz piece of pemmican can contain 700 – 800 calories.
his makes it great in survival situations where you’re expending a lot of calories.
Pemmican is used as a way to preserve meats and as survival food.
When refrigeration isn’t available, pemmican allows you to keep meat that you can’t consume right away. It’s excellent for keeping meat edible for nearly an indefinite amount of time.
As a survival food, pemmican can be transported easily and provides a lot of calories. It’s ideal for keeping you going when you’re doing the strenuous activities that are normally associated with survival.
Most recipes for pemmican don’t include salt. This doesn’t mean that you can’t add it if you have it available, it just means that traditionally salt was sometimes not available and isn’t needed to make pemmican.
Some people salt their meat before they dry it, others add salt into the mixture as they’re forming their pemmican into bars. Either way is fine. You can also just add salt to the pemmican when you’re getting it ready to eat.
The completed pemmican product contains a ton of calories (it’s basically protein and fat) and can fuel the body for hours. On top of that, pemmican is lightweight, stores for long periods of time and can actually be quite tasty if it’s prepared properly and used in a stew or fried.
If you’re looking to produce pemmican to supplement your food storage, you can go to the butcher to get the necessary fat and meat. Get lean cuts of meat and suet.
Suet is the hard white fat that surrounds the liver and other organs. You’ll have fewer problems getting this fat to render than other types of fat and it’ll make your pemmican taste better as well.
Once you learn how to make pemmican you’ll be able to preserve meat for a long time without the need for many other items or special equipment!